Smart Material & Design Lab.

Department of Mechanical, Robotics and Energy Engineering, Dongguk University

Referred International Journal Papers




  1. Izaz R., Lee J., Kim H. S. and Kim M, “Parametric Investigations of Magnetic Nanoparticles Hyperthermia in Ferro-fluids using Finite Element Analysis,” International Journal of Thermal Sciences, Vol. 159, January 2021, 106604, pp. 1-10, https://doi.org/10.1016/j.ijthermalsci.2020.106604.
  2. Kakani V., Ramesh S., Yadav H.M., Kumar A.K., Shinde S., Sandhu S., Quang L.N.D., Kim H.S., Kim H.S., Kim H. and Bathula C., “Facile synthesis of CuO/NiO/nitrogen doped rGO by ultrasonication for high performance supercapacitors,” Journal of Alloys and Compounds, Vol. 847, December 20, 2020, 156411,
  3. Ali R., Izaz R. and Kim H.S., “Rotate Vector (RV) Reducer Fault Detection and Diagnosis System: Towards Component Level Prognostics and Health Management (PHM),” Sensors, Vol. 20, 6485, November 30, 2020, pp. 1-31
  4. Salman K., Lim W., Kim H.S., Oh Y.T., Youn B.D., Kim H.S. and Bae Y.C., “Intelligent Steam Power Plant Boiler Waterwall Tube Leakage Detection via Machine Learning-Based Optimal Sensor Selection,” Sensors, Vol. 20, 6356, November 7, 2020, pp. 1-17
  5. Karuppasamy K., Vikraman D., Jeon J.H; Ramesh S., Yadav H.M., Vasanth R.J. Bose R., Kim H.S., Alfantazi A., Kim H.S., “Highly porous, hierarchical microglobules of Co3O4 embedded N-doped carbon matrix for high performance asymmetric supercapacitors”, Applied Surface Science, Vol. 529, November 1, 2020
  6. Ramesh S., Yadav H.M., Bathulu C., Sinde S., Sivasamy A., Kim H.S., Kim H.S. and Kim J.H., “Cubic nanostructure of Co3O4@nitrogen doped graphene oxide/polyindole composite efficient electrodes for high performance energy storage applications,” Journal of Materials Research and Technology, Vol. 9, No. 5, September 1, 2020, pp. 11464-11475
  7. Bathula C. Yadav H.M., Ramesh S., Kaliamurthy A.K., Shinde S., Sandhu S., Sivasamy A., Shrestha N.K., Kim H.S., and Kim H.S., “Impact of Polypyrrole incorporation on nickel oxide@multi walled carbon nanotube composite for application in supercapacitors,” Polymer Testing, Vol 89, September 1, 2020
  8. Huang B., Wang J. and Kim H. S., “A stress function based model for transient thermal stresses of composite laminates in various time-variant thermal environments,” International Journal of Mechanical Sciences, Vol. 180, August 15, 2020
  9. Palem R.R., Ramesh S., Yadav H.M., Kim J.H., Sivasamy A., Kim H.S., Kim J.H. Lee S.H. and Kang T.J., “Nanostructured Fe2O3@nitrogen-doped multiwalled nanotube/cellulose nanocrystal composite material electrodes for high-performance supercapacitor applications,” Journal of Materials Research and Technology, Vol. 9, No. 4, July 26, 2020, pp. 7615-7627
  10. Kathalingam A., Ramesh S., Yadav H.M., Choi J.H., Kim H.S and Kim H.S., “Nanosheet-like ZnCo2O4@nitrogen doped graphene oxide/polyaniline composite for supercapacitor application: effect of polyaniline incorporation,” Journal of Alloys and Compounds, Vol. 830, July 25, 2020
  11. Izaz R., Salman K., Asif K., Lee J., Kim H. S. and Kim M, “A Review on Numerical Modeling for Magnetic Nanoparticle Hyperthermia: Progress and Challenges,” Journal of Thermal Biology, Vol. 91, July 1, 2020, 102644, pp. 1-12
  12. Ramesh S., Yadav H.M., Shinde S., Bathulu C., Lee Y.J., Cheedarala R.K. Kim H.S., Kim H.S. and Kim J.H., “Fabrication of Nanostructured SnO2@Co3O4/Nitrogen doped Graphene Oxide Composite for Symmetric and Asymmetric Storage Devices,” Journal of Materials Research and Technology, Vol. 9, No. 3, June 1, 2020, pp. 4183-4193
  13. Asif K., Shin J., Lim W.C., Kim N.Y. and Kim H. S, “A Deep Learning Framework for Vibration-Based Assessment of Delamination in Smart Composite Laminates,” Sensors, Vol. 20, 2335, April 20, 2020, pp. 1-17
  14. Huang B., Chen J., Hua L., Yi L., Ma T., Wang J. and Kim H. S, “A stress function based viscoelastic model for relaxation of free edge stresses in composite laminates,” Composite Structures, Vol. 232, No. 5, January 15, 2020, pp. 111581.Vol. 232, No. 5, January 15, 2020, pp. 111581.
  15. Bathula C., Appiagyei A.B., Yadav H., Kumar A.K, Ramesh S., Shrestha N.K., Shinde S., Kim H.S., Kim H. S., Reddy V. and Aurifullah M., “Facial Synthesis of Triphenylamine Based Hyperbranched Polymer for Organic Field Effect Transistors,” Nanomaterials, Vol. 9, No. 12, December 16, 2019, 1787, doi:10.3390/nano9121787.
  16. Shinde S., Ramesh S, Bathula S, Ghodake G., Kim D.Y., Jagadale A.D., Kadam A. A., Waghmode D.P., Sreekanth T.V.M., Kim H. S., Nagajyothi P.C., and Yadav H.M., “Novel approach to synthesize of NiCo2S4 composite for high-performance supercapacitor application with different molar ratio of Ni and Co,” Scientific Reports, Vol. 9, Article number: 13717, September 23, 2019, pp. 1-10, DOI: 10.1038/s41598-019-50165-5.
  17. Ramesh S., Yadav H., Karuppasamy K., Vikraman D., Kim H.S., Kim J.H. and Kim H. S, “Fabrication of manganese oxide@nitrogen doped graphene oxide/polypyrrole (MnO2@NGO/PPy) hybrid composite electrodes for energy storage devices,” Journal of Materials Research and Technology, Vol. 8, No. 5, September 2, 2019, pp. 4227-4238.
  18. Kathalingam A., Ajmal H. M. S., Ramesh S., Kim H. S, Kim S.D., Choi S.H., Yang W., Kim K.K. and Kim H.S., “Poly(methyl methacrylate)-derived graphene films on different substrates using rapid thermal process: a way to control the film properties through the substrate and polymer layer thickness,” Journal of Materials Research and Technology, Vol. 8, No. 5, September 2, 2019, pp. 3752-3763.
  19. Ramesh S., Yadav H., Lee Y.J., Hong G.W., Kathalingam A., Sivasamy A., Kim H.S., Kim H. S and Kim J.H., “Porous materials of nitrogen doped graphene oxide@SnO2 electrode for capable supercapacitor application,” Scientific Reports, Vol. 9, September 2, 2019, pp. 1-10, DOI: 10.1038/s41598-019-48951-2.
  20. Salman K., Izaz R., Asif K., Kim N., and Kim H. S, “A review of human-powered energy harvesting for smart electronics: Recent Progress and challenges,” International Journal of Precision Engineering -Green Technology, Vol. 6, No. 4, August 16, 2019, pp. 821-851.
  21. Asif K., Kim, N., Shin J.K., Kim H. S and Youn B.D., “Damage assessment of laminated composite structures via machine learning: A review,”JMST Advances, Vol. 1, No. 1, June 2019, pp. 107-124.
  22. Ramesh S., Vikraman D., Karuppasamy K., Yadav H.M., Sivasamy A., Kim H.S., Kim J.H. and Kim H. S, “Controlled synthesis of SnO2@NiCo2O4 /nitrogen doped multiwalled carbon nanotube hybrids as an active electrode material for supercapacitors”Journal of Sol-Gel Science and Technology, Vol. 794, July 25, 2019, pp. 186-194.
  23. Kathalingam A., Ramesh S., Sivasamy A., Kim H.S. and Kim H. S, “Supercapacitor performance of MnO2/NiCo2O4@N-MWCNT hybrid nanocomposite electrodes,”Journal of Sol-Gel Science and Technology, , Vol. 91, July 1, 2019, pp. 154-164.
  24. Ramesh S., Kathalingam A., Karuppasamy K., and Kim H. S, “Nanostructured CuO/Co2O4@ Nitrogen doped MWCNT hybrid composite electrode for high-performance supercapacitors,” Composites Part B, Vol. 166, June 1, 2019, pp. 74-85.
  25. Asif K., Ko D.K, Lim S.C. and Kim H. S, “Structural Vibration-Based Classification and Prediction of Delamination in Smart Composite Laminates using Deep Learning neural network,” Composites Part B: Engineering, Vol. 161, March 15, 2019, pp. 586-594.
  26. Asif K. and Kim H. S, “Active vibration control of a piezo-bonded laminated composite in the presence of sensor partial debonding and structural delaminations,” Sensors, Vol. 19, 540; doi:10.3390/s19030540, Jan. 28, 2019, pp. 1-14.
  27. Asif K. and Kim H. S, “Assessment of Delaminated Smart Composite Laminates via System Identification and Supervised Learning,”Composite structures, Vol. 206, December 15, 2018, pp.354-362.
  28. Ramesh S., Karuppasamy K., Kim H. S, and Kim J.H. “Hierarchical Flower like Morphology of Co3O4@MnO2/NGO hybrid composite for high-performance supercapacitor,” Scientific report, Vol. 8, November 8, pp. 1-11, DOI:10.1038/s41598-018-34905-7.
  29. Asif K., Faisal R.K. and Kim H. S, “Electro-active Paper as a Flexible Mechanical Sensor, Actuator and Energy Harvesting Transducer: A Review,”Sensors, Vol. 18, 3474; doi:10.3990/s18103474, October 15, 2018, pp. 1-19.
  30. Ramesh S., Vikraman D., Kim H. S, and Kim J.H, “Electrochemical performance of MWCNT/GO/NiCo2O4 decorated hybrid nanocomposite for supercapacitor electrode materials,”Journal of Alloys and Compounds, Vol. 765, October 15, 2018, pp. 369-379.
  31. Msolli S. Labergere C., Martiny M., Jrad M., Robin G., Kim H. S and Choquart F., “Mechanical behavior of embossed AA1050-O sheets subjected to tension and forming,”International journal of Precision Engineering and Manufacturing, Vol. 19, No. 10, October 2018, pp. 1545-1552.
  32. Ramesh S., Kim H. S, Msolli S., Rengaraj A.K., Huh Y.S. and Kim J.H., “Rod like Structure of Cotton Cellulose / Polyvinyl alcohol / Tellurium dioxide (TeO2) hybrid nanocomposite and antimicrobial properties,”Journal of Polymer-Plastics Technology and Engineering, Vol. 57, No. 11, July 1, 2018, pp. 1131-1138.
  33. Msolli S. and Kim H. S , “Study of the fracture mechanisms of metallization systems deposited on copper substrate using an in-situ microtension test,” Electronic Materials Letters, Vol. 14, No. 4, June 8, 2018, pp.517-525.
  34. Msolli S., Baazaoui A., Alexis J. and Kim H. S , “Identification of damage and fracture modes in power electronic packaging from experimental micro-shear tests and finite element modeling,” Engineering Fracture Mechanics, Vol. 188, No. 1, February 1, 2018, pp.470-492.
  35. Ramesh S.,Kim H. S , and Kim J.H., “Cellulose-Polyvinyl alcohol-nanoTiO2 hybrid nanocomposites: Thermal, optical and antimicrobial properties against pathogenic bacteria,”Journal of Polymer-Plastics Technology and Engineering, (accepted).
  36. Ramesh S., Kim H. S , Sivasamy A., and Kim J.H., “Synthesis of octa(maleimidophenyl) silsesquioxane-SiO2/TiO2 hybrid nanocomposites: Adsorption behavior for the removal of an organic methylene blue dye and antimicrobial activity against pathogens”Journal of Polymer-Plastics Technology and Engineering, (accepted).
  37. Asif K. and Kim H. S , “Assessment of Sensor debonding failure in system identification of smart composite laminates,” NDT & E International, Vol. 93, January 1, 2018, pp. 24-33.
  38. Ramesh S., Karuppasamy K., Msolli S., Kim H. S, and Kim J.H., “A nanocrystalline structured of NiO/MnO2@Nitrogen-doped Graphene oxide hybrid nanocomposite for high performance supercapacitor,”New Journal of Chemistry, Vol. 41, No 24, November 10, 2017, pp. 15517-15527.
  39. Ramesh S., Lee Y.J., Kim J.G., Msolli S.,Kim H. S, and Kim J.H., “Synthesis of Co3O4/gold @MWCNT/Polypyrrole hybrid composite for DMMP detection in Chemical sensor,”RSC Advances, Vol. 80, No 7, November 1, 2017, pp. 50912-50919.
  40. Ramesh S., Haldorai Y., Sivasamy A. and Kim H. S, “Nanostructured Co3O4/nitrogen doped carbon nanotube composites for high-performance supercapacitors,”Materials Letters, Vol. 206, November 1, 2017, pp.39-43.
  41. Asif K., Lee H. S. and Kim H. S, “Analysis of Sensor Debonding Failure in Active Vibration Control of Smart Composite Plate,”Journal of Intelligent Material Systems and Structures, Vol. 28, No. 18, November 1, 2017, pp. 2603-2616.
  42. Ramesh S., Sivasamy A., Kim H. S and Kim J.H., “High-performance N-Doped MWCNT/GO/Cellulose hybrid composites for supercapacitor electrodes,”RSC Advances, Vol. 78, October 25, 2017, pp. 49799-49809.
  43. Jo H. H., Kim M., Lim J.Y. and Kim H. S “Atmospheric pressure plasma treatment for the strength of waste-wood biocomposites,”Science of Adavanced Materials, Vol. 9, No. 10, October 1, 2017, pp. 1810-1814.
  44. Asif K., Kim H. S and Youn B. D., “Modeling and Assessment of Partially Debonded Piezoelectric Sensor in Smart Composite Laminates,” International Journal of Mechanical Sciences. Vol. 131-132, October 1, 2017, pp. 26-36.
  45. Ramesh S., Kim H. S, Lee Y. J., Hong G. W., Jung D. and Kim J.H., “Synthesis of cellulose-L-tyrosine-SiO2/ZrO2 hybrid nanocomposites by sol-gel process and its potential,” International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 9, September 1, 2017, pp. 1297-1306.
  46. Msolli S., Alexis J. and Kim H. S, “Mechanical behavior and adhesion of Ti/Cr/Au metallization system on diamond substrate,”Advanced Engineering Materials, Vol. 19, No 8, August 1, 2017, pp. 1-9.
  47. Ramesh S., Haldorai Y., Kim H. S and Kim J.H., “A Nanocrystalline Co3O4@Polypyrrole/MWCNT hybrid nanocomposite for high performance electrochemical supercapacitor,”RSC Advances, RSC Advances, Vol. 58, No. 7., July 24, 2017, pp.36833-36843.
  48. Ramesh S., Kim H. S, Lee Y.J., Hong G.W. and Kim J.H., “Nanostructured silica/gold - cellulose bonded amino-POSS hybrid composite via sol-gel process and its properties,” Nanoscale Research Letter, Vol. 12:381, June 2, 2017, pp.1-13.
  49. Ramesh S., Kim H. S, Haldorai Y., Han Y.K. and Kim J.H., “Fabrication of nanostructured MnO2/carbon nanotube composite from 3D precursor complex for high-performance supercapacitor,”Materials Letters, Vol. 196, 1 June 2017, pp. 132-136.
  50. Msolli S., Alexis J., Kim H. S, Dalverny O. and Karama. M., “Assessment of candidate metallization systems deposited on diamond using nano-indentation and nano-scratching tests,” Thin Solid Films, Vol. 619, November 30, 2016.
  51. Kovvali R.K., Hodges D.H., Yu W., Kim H. S. and J.S. Kim, “Comments on “A Rankine-Timonshenko-Vlasov beam theory for anisotropic beams via an asymptotic strain energy transformation”, European Journal of Mechanics A-Solids, Vol. 60, Nov 1. 2016, pp. 359-360.
  52. Asif K., Abas Z. and Kim H. S, Kim J., “Recent Progress on Cellulose-Based Electro-Active Paper, Its Hybrid Nanocomposites and Applications,” Sensors, Vol. 16, No 8, doi:10.3390/s16081172, July 26 2016.
  53. Huang B., Kim H. S.., Wang J., Du J. and Guo Y., “Time-dependent stress variations in symmetrically viscoelastic composite laminates under uniaxial tensile load,” Composite Structures. (10.1016/j.compstruct.2016.01.101)
  54. 79. Asif K., Abas Z., Kim H. S., and Oh I. K., “Piezoelectric Thin Films: An Integrated Review of transducers and energy harvesting, ” Smart Materials and Structures, Vol.25, No. 5, May 2016,, 053002. Smart Materials and Structures.
  55. Huang B., Kim H. S.., Wang J. and Du J., “Interlaminar stress analysis of magneto-electro-elastic composite layered laminates using a stress function based iterative approach,” Composites Part B: engineering. Vol. 90, April 1, 2016, pp. 406–415
  56. Yoon H., Youn B.D. and Kim H. S.., “Kirchhoff plate theory-based electromechanically-coupled analytical model considering inertia and stiffness effects of a surface-bonded piezoelectric patch,”, Smart Materials and Structures, Vol. 25, No. 2, February 1, 2016, 025017
  57. B. Huang, Kim H. S.., J. Wang and J. Du, “Free edge stress prediction for magneto-electro-elastic laminates using a stress function based equivalent single layer theory,” Composites Science and Technology. Vol. 123, February 8, 2016, pp. 205-211.
  58. Abas Z., Yang D. H., Kim H. S., Kwak M. K., and Kim J., “Characterization of Electro-Active Paper Vibration Sensor by Impact Testing and Random Excitation,” International Journal of Applied Mechanics, Vol. 7, No. 4, August 11, 2015, 1550065.
  59. Huang B. and Kim H. S.., Yun G. H., “Modeling of partially debonded piezoelectric actuator in smart composite laminates,” Smart Materials and Structures, Vol. 24, No. 7, July 1, 2015, 075013
  60. Abas Z., Kim H. S.., Zhai L. and Kim J., “Experimental Study of Vibrational Energy Harvesting Using Electro-Active Paper,” International Journal of Precision Engineering and Manufacturing, Vol.16, No. 6, June 1, 2015, pp. 1187-1193
  61. Huang B. and Kim H. S.., “Frequency response analysis of delaminated smart composite plate,” Journal of Intelligent Material Systems and Structures, Vol. 26, No. 9, June 1, 2015, pp. 1091-1102
  62. Huang B. and Kim H. S.., Yun G. H., “Investigation of Actuator Debonding Effects on Active Control in Smart Composite Laminates,” Advances in Mechanical Engineering, April 21, 2015, pp. 1-7, doi:10.1177/1687814015578363.
  63. Kim J. H., Shim B. S., Kim H. S.., Lee Y. J., Min S. K., Jang D., Abas Z. and Kim J., “Review of Nanocellulose for Sustainable Future Materials,” International Journal of Precision Engineering and Manufacturing-Green Technology, Vol.2, No. 2, April 1, 2015, pp. 197-213.
  64. Huang B. and Kim H. S.., Youn B. D., “Active Vibration Control of Smart Composite Laminates with Partial Actuator Debonding,” International Journal of Precision Engineering and Manufacturing, Vol.16, No. 4, April 1, 2015, pp. 831-840.
  65. Song M. H., Kim H. S.. and Kim B., “Influence of Production Parameters on Gas Hydrate and Ice Powder Pelletizing,” Journal of Mechanical Science and Technology, Vol.29, No. 3, March 1, 2015, pp. 1181-1186.
  66. Sohn J. W. and Kim H. S.., “Active Recovery of Vibration Characteristics for Delaminated Composite Structure Using Piezoelectric Actuator,” International Journal of Precision Engineering and Manufacturing, Vol.16, No. 3, March 1, 2015, pp. 597-602.
  67. Abas Z., Kim H. S.., Zhai L. and Kim J., “Finite Element Analysis of Vibration Driven Electro-Active Paper Energy Harvester with Experimental Verification,” Advances in Mechanical Engineering, Vol. 7, No. 2, pp. 1-7, February 23, 2015, doi: 10.1177/ 1687814015571231.
  68. Huang B. and Kim H. S.., “Interlaminar stress analysis of piezo-bonded composite laminates using extended Kantorovich method,” International Journal of Mechanical Sciences, Vol. 90, January 1, 2015, pp. 16-24.
  69. Abas Z., Kim H. S.., Kim J. and Kim J.H., “Cellulose Electro-active Paper: From Discovery to Technology Applications,” Frontiers in Materials, Vol. 1, September 1, 2014, pp. 1-4.
  70. Yoon G. H. and Kim H.S.,“Damage Analysis of Biocomposite Laminates using Model Order Reduction,” Journal of Nanoscience and Nanotechnology, Vol. 14, October 1, 2014, pp. 7508-7515.
  71. Kim G.H., Ramesh S., Kim J.H, Jung D. and Kim H. S.., “Cellulose-Silica/Gold Nanomaterials for Electronic Applications,” Journal of Nanoscience and Nanotechnology, Vol. 14, October 1, 2014, pp. 7495-7501,
  72. Abas Z., Kim H. S.., Zhai L., Kim J. and Kim J. H., “Possibility of Cellulose-based Electro-Active Paper Energy Scavenging Transducer,” Journal of Nanoscience and Nanotechnology, Vol. 14, October 1, 2014, pp. 7458-7462
  73. Huang B. and Kim H. S.., “Free edge stress analysis of functionally graded material layered biocomposite laminates,” Journal of Nanoscience and Nanotechnology, Vol. 14, October 1, 2014, pp. 7451-7457 (
  74. Huang B. and Kim H. S.., “Transient analysis of biocomposite laminates with delamination,” Journal of Nanoscience and Nanotechnology, Vol. 14, October 1, 2014, pp. 7432-7438
  75. Huang B., Koh B.H. and Kim H. S.., “PCA-based damage classification of delaminated smart composite structures using improved layerwise theory,” Computers and Structures, Vol. 141, August 1, 2014, pp. 26-35.
  76. Abas Z., Kim H. S.., Zhai L., Kim J. and Kim J. H., “Electrode effects of a cellulose based electro-active paper energy harvester,” Smart Materials and Structures, Vol. 23, No. 7, July 1, 2014, 074003.
  77. Huang B. and Kim H. S.., “Control of Free-edge Interlaminar Stresses in Composite Laminates Using Piezoelectric Actuator,” Smart Materials and Structures, Vol. 23, No. 7, July 1, 2014, 074002.
  78. Huang B. and Kim H. S.., “Reduction of free edge peeling stress of laminated composites using active piezoelectric layers,” The Scientific World Journal, Vol. 2014, June 16, 2014, Article ID 439492, 2014.
  79. Huang B. and Kim H. S., “Free-edge interlaminar stress analysis of piezo-bonded composite laminates under electric excitation,” International Journal of Solids and Structures, Vol. 51, No.6. March 15, 2014, pp. 1246-1252.
  80. Lee Y., Koh B.H., Kim H. S. and Song M. H., “Compressive Strength Properties of Natural Gas Hydrate Pellet by Continuous Extrusion from a Twin-Roll System,” Advances in Materials Science and Engineering, Vol. 2013, December 2013, Article ID 207867.
  81. Kim M., Lim J.Y. and Kim H. S., “A study on the effect of plasma treatment for waste wood biocomposites,” Journal of Nanomaterials, Vol. 2013, July 2013, Article ID 138083.
  82. Kim H. S. and J.S. Kim, “A Rankine-Timonshenko-Vlasov beam theory for anisotropic beams via an asymptotic strain energy transformation,” European Journal of Mechanics A-Solids, Vol. 40, July-August 2013, pp. 131-138.
  83. Kim H. S., Sohn J. W., Jeon J. and Choi S. B., “Reduction of the Radiating Sound of a Submerged Finite Cylindrical Shell Structure by Active Vibration Control,” Sensors, Vol. 13, No.2. February 6 2013, pp. 2131-2147.
  84. Kim H. S., Lee J. and Cho M., “Free-Edge Interlaminar Stress Analysis of Composite Laminates Using Interface Modeling,” Journal of Engineering Mechanics-ASCE, Vol. 138. No. 8, August 2012, pp. 973-983.
  85. Ghoshal A., Le D. D. and Kim H. S., “Technological Assessment of High Temperature Sensing Systems under Extreme Environment,” Sensor Review, Vol. 32, No. 1, January 2012, pp. 66-71.
  86. Kim H. S., Kim J.H. and Kim J., “A Review of Piezoelectric Energy Harvesting Based on Vibration,” International Journal of Precision Engineering and Manufacturing, Vol. 12, No. 6, December 2011, pp. 1129-1141.
  87. Kim H. S., Sohn J. W. and Choi S. B., “Vibration Control of a Cylindrical Shell Structure Using Macro Fiber Composite Actuators,” Mechanics Based Design of Structures and Machines, Vol. 39, No. 4, October 2011, pp. 491-506.
  88. Sohn J. W., Choi S. B. and Kim H. S., “Vibration Control of Smart Hull Structure with Optimally Placed Piezoelectric Composite Actuators,” International Journal of Mechanical Sciences, Vol. 53. No. 8, August 2011, pp. 647-659.
  89. Lee J., Cho M. and Kim H. S., “Bending Analysis of Laminated Composite Patch Considering Free-edge Effect Using Stress-Based Equivalent Single-Layer Composite Model,” International Journal of Mechanical Sciences, Vol. 53. No. 8, August 2011, pp. 606-616.
  90. Kim H. S., Mall S. and Ghoshal A., “Two Dimensional and Three Dimensional Finite Element Analysis of Finite Contact Width on Fretting Fatigue,” Materials Transactions, Vol. 52, No. 2, 2011, pp. 147-154.
  91. Kim J. Y., Lee H.C. and Kim H. S., “Beam Vibration Control Using Cellulose-based Electro-Active Paper Sensor,” International Journal of Precision Engineering and Manufacturing, Vol.11, No. 6, 2010, pp. 823-827.
  92. Kim H. S., Cho M., Lee J., Deheeger A., Grédiac M and Mathias J.S., “Three Dimensional Stress Analysis of a Composite Patch Using Stress Functions,” International Journal of Mechanical Sciences, Vol.52, No. 12, 2010, pp. 1646-1659.
  93. Kim J. Y., Lee H.C., Kim H. S. and Kim J., “Vibration Sensor Characteristics of Piezoelectric Electro-Active Paper,” Journal of Intelligent Material Systems and Structures, Vol. 21, No. 11, July 2010, pp. 1123-1130.
  94. Ghoshal A., Prosser W.H., Chattopadhyay A., Copeland B., and Kim H. S., “Development of Embedded Piezoelectric Acoustic Sensor Array Architecture,” Microelectronics Reliability, Vol. 50, No. 6, June, 2010, pp. 857-863.
  95. Mahadeva S.K, Kim J., Kang K.S., Kim H. S. and Park J.M., “Effect of poly(ethylene oxide)- poly(ethylene glycol) addition on actuation behavior of cellulose electroactive paper,” Journal of Applied Polymer Science, Vol. 114, No. 2, October 15, 2009, pp. 847-852.
  96. Lee S.W., Kim J.H, Kang K., Kim J., Kim H. S. and Yang C., “Characterization of Micro-scale Creep Deformation of Electro-Active Paper Actuator,” Smart Materials and Structures, Vol. 18, No. 9, July 1, 2009, 095008.
  97. Kim J. H, Kim J.H., Kim J., Kim H. S. and Yang C., “Piezoelectricity of wet drawn cellulose Electro-Active Paper,” Sensors and Actuators A: Physical,vol. 154, No.1, August 31, 2009, pp. 117-122
  98. Lee S. W, Kim J.H., Kim J. and Kim H. S., “Characterization and Sensor Application of Cellulose Electo-actvie Paper (EAPap),” Chinese Science Bulletin, Vol. 54, No. 15, August 2, 2009, pp. 2703-2707.
  99. Kim H. S., Yang C. and Kim J., “Hygrothermal Behavior of Electro-Active Paper Actuator,” Journal of Mechanical Science and Technology, Vol. 23, No. 8., August 1, 2009, pp. 2285~2290.
  100. Kim J. and Kim H. S., “Finite Element Analysis of Piezoelectric Underwater Transducers for Calculating Acoustic Characteristics,” Journal of Mechanical Science and Technology, Vol. 23, No. 2, February 1, 2009, pp. 452-460.
  101. Kim J., Ampofo J., Craft W., and Kim H. S., “Modeling Elastic, Viscous and Creep Characteristics of Cellulose Electro-Active Paper,” Mechanics of Materials,Vol. 40, No.12, 2008, pp. 1001-1011.
  102. Kim H. S., Li Y. and Kim J., “Electro-mechanical Behavior and Direct Piezoelectricity of Cellulose Electro-Active Paper,” Sensors and Actuators A: Physical, Vol. 147, No. 1, 2008, pp.304-309.
  103. Kim H. S., Rhee S.Y. and Cho M., “Simple and Efficient Interlaminar Stress Analysis of Composite Laminates with Internal Ply-Drop,” Composite Structures, Vol. 84, No. 1, 2008, pp. 73-86.
  104. Yun G.Y., Kim H. S. and Kim J., “Blocked Force Measurement of Electro-Active Paper Actuator Using Cantilevered Force Transducer,” Smart Materials and Structures, Vol. 17, No. 2, 025021, 2008.
  105. Park J.S., Kim H. S. and Choi S.B., “New Design Methodology for Piezoelectric Shunt Structures Using Admittance Analysis,” Proceedings of the Institution of Mechanical Engineers: Part C - Journal of Mechanical Engineering Science, Vol. 222, No. 2, 2008, pp. 131-145.
  106. Kim H. S., Kim J., Jung W., Ampofo J., Craft W., and Sankar J., “Mechanical Properties of Cellulose Electro-Active Paper under Different Environmental Conditions,” Smart Materials and Structures, Vol. 17, No. 1, 015029, 2008.
  107. Yun G. Y., Kim H. S., Kim J., Kim K. and Yang C., “Effect of Aligned Cellulose Film to the Performance of Electro-Active Paper Actuator,” Sensors and Actuators A: Physical, Vol. 141, No. 2, 2008, pp.530-535.
  108. Kim H. S., Kim J., Choi S. B., Ghoshal A. and Chattopadhyay A., “Modal Strain Damage Index of Laminated Composite Structures Using Smooth Transition of Displacement,” AIAA Journal, Vol. 45, No. 12, 2007, pp. 2972-2978.
  109. Kim J., Jung W. and Kim H. S., “In-plane Strain of Electro-Active Papers Under Electric Fields,” Sensors and Actuators A: Physical, Vol. 140, No. 2, 2007, pp. 225-231.
  110. Zhao L., Kim H. S. and Kim J., “Optimal Design of Smart Panel Using Admittance Analysis,” Journal of Mechanical Science and Technology, Vol. 21, No.4, 2007, pp. 642-653.
  111. Ghoshal A., Martin W. N., Schulz M. J., Chattopadhyay A., Prosser W. H., Kim H. S., “Health Monitoring of Composite Plates using Acoustic Wave Propagation, Continuous Sensors and Wavelet Analysis,” Journal of Reinforced Plastics and Composites, Vol. 26, No. 1, 2007, pp 95-112.
  112. Choi S.B., Kim H.S., and Park J.S., “Multi-mode Vibration Reduction of a CD-ROM Drive Base Using a Piezoelectric Shunt Circuit,” Journal of Sound and Vibration, Vol. 300, No. 1-2, 2007, pp. 160-175.
  113. Zhao L., Kim H. S. and Kim J., “Noise Reduction using Smart Panel with Shunt Circuit,” AIAA Journal, Vol. 45, No. 1, 2007, pp. 79-89
  114. Ghoshal A. and Kim H. S., “Damage Tolerance Management for Aircraft and Rotorcraft Structural Components,” Journal of Aircraft, Vol. 43, No. 6, 2006, pp. 1676-1684.
  115. Sohn J. W., Kim H. S., and Choi S.B., “Active Vibration Control of Smart Hull Structures using Piezoelectric Actuators,” Proceedings of the Institution of Mechanical Engineers: Part C - Journal of Mechanical Engineering Science, Vol. 220, No. 9, 2006, pp. 1329-1337.
  116. Rhee S.Y., Cho M., and Kim H. S., “Layup Optimization with GA for Tapered Laminates with Internal Plydrops,” International Journal of Solids and Structures, Vol. 43, No. 16, 2006, pp. 4757-4776.
  117. Ghoshal A., Kim H.S., Kim J., Choi S.B., Prosser W.H. and Tai H., “Modeling Delamination in Composite Structures by Incorporating the Fermi-Dirac Distribution Function and Hybrid Damage Indicators,” Finite Elements in Analysis and Design, Vol. 42, No. 8-9, 2006, pp.715-725.
  118. Kim H. S, Ghoshal A., Kim J. and Choi S.B., “Transient Analysis of Delaminated Smart Composite Structures by Incorporating Fermi-Dirac Distribution,” Smart Materials and Structures, Vol. 15, No. 2, 2006, pp. 221-231.
  119. Park J.S., Kim H. S and Choi S.B., “Design and Experimental Validation of Piezoelectric Shunt Structures Using Admittance Analysis,” Smart Materials and Structures, Vol. 15, No. 1, 2006, pp. 93-103.
  120. Kim H. S and S. Mall, “Investigation Into Three-Dimensional Effects of Finite Contact Width on Fretting Fatigue,” Finite Element in Analysis and Design, Vol. 41, No. 11-12, 2005, pp. 1140-1159.
  121. Ghoshal A., Kim H. S., Chattopadhyay A. and Prosser W. H., “Effect of Delamination on Transient History of Smart Composite Plates,” Finite Element in Analysis and Design, Vol. 41, No. 9-10, 2005, pp. 850-874.
  122. Zhu L., Kim H. S, Chattopadhyay A. and Goldberg R., “Improved Transverse Shear Calculations for Rate-Dependent Analyses of Polymer Matrix Composites,” AIAA Journal, Vol. 43, No. 4, 2005, pp. 895-905.
  123. Kim H. S., Ghoshal A., Chattopadhyay A. and Prosser W. H., “Development of Embedded Sensor Models in Composite Laminates for Structural Health Monitoring,” Journal of Reinforced Plastics and Composites, Vol. 23, No. 11, 2004, pp. 1207-1240.
  124. Chattopadhyay A., Kim H. S. and Ghoshal A., “Non-linear Vibration Analysis of Smart Composite Structures with Discrete Delamination Using a Refined Layerwise Theory,” Journal of Sound and Vibration, Vol. 273, No. 1-2, 2004, pp. 387-407.
  125. Zhou X., Chattopadhyay A. and Kim H. S., “An Efficient Layerwise Shear-Deformation Theory and Finite Element Implementation,” Journal of Reinforced Plastics and Composites, Vol. 23, No. 2, 2004, pp.131-152.
  126. Kim H. S., Chattopadhyay A. and Ghoshal A., “Dynamic Analysis of Composite Laminates with Multiple Delamination using Improved Layerwise Theory,” AIAA Journal, Vol. 41, No. 9, 2003, pp. 1771-1779.
  127. Kim H. S., Chattopadhyay A. and Ghoshal A., “Characterization of Delamination Effect on Composite Laminates Using a New Generalized Layerwise Approach,” Computers & Structures, Vol. 81, No. 15, 2003, pp. 1555-1566.
  128. Kim H. S., Zhou X. and Chattopadhyay A., “Interlaminar Stress Analysis of Shell Structures with Piezoelectric Patch Including Thermal Loading,” AIAA Journal, Vol. 40, No. 12, 2002, pp. 2517-2525.
  129. Kim H. S., Cho M. and Song S. J., "Stability Analysis of a Turbine Rotor System with Alford Forces," Journal of Sound & Vibration, Vol. 258, No. 4, 2002, pp. 777-790.
  130. Kim H. S., Chattopadhyay A. and Nam C., “Implementation of A Coupled Thermo-Piezoelectric-Mechanical Model in the LQG Controller Design for Smart Composite Shells,” Journal of Intelligent Material Systems and Structures, Vol. 13, No. 11, 2002, pp. 713-724.
  131. Kim H. S., Cho M. and Kim G., “Free-Edge Strength Analysis in Composite Laminates by the Extended Kantorovich Method, ” Composite Structures, Vol. 49, No. 2, 2000, pp. 229-235.
  132. Cho M. and Kim H. S., “Iterative Free-Edge Stress Analysis of Composite Laminates under Extension, Bending, Twisting and Thermal Loadings,” International Journal of Solids and Structures, Vol. 37, No. 3, 2000, pp. 435-459.